PF Small-Angle X-ray Scattering Beamline
Welcome to PF SAXS beamlines

From January 2012, it is not necessary to check with the person in charge of the distribution board when connecting a single-phase 100V heating and heating device with BL6A and 10C. Please follow the precautions below.

　　　　　　　

1. Connect to the tap labeled "For User" in the experimental hatch.
2. Please contact us in advance if you want to connect a device that consumes more than 15A. Since it cannot be connected to a tap or an outlet, it is necessary to take measures such as connecting it directly to the terminal block.
3. In the case of BL6A, all are connected to outlets with earth leakage breakers, so you can connect to the "user" tap as it is. (If an electric leakage occurs, it will be cut off, so please contact the person in charge or the operation duty.)
4. In the case of BL-10C, we have prepared a power adapter with an earth leakage breaker (labeled for heating and heating device). It is placed on the red magnet tray on the right side wall inside the hatch, so please put it back in the same place after use.

reference：http://pfwww.kek.jp/safety/heatsys.html